山东冷库铝排管配件

如何更好地使用颗粒包装机。

How to better use granular packaging machine.

1、机器的放置环境应该是干燥的室内，不能放置在含有酸类或腐蚀性的气体的场所。山东包装机

1, the machine should be placed in the environment of the environment, can not be placed in the place containing acid or corrosive gases.

2、我们在使用完机器后，应取出旋转滚筒进行清洗并刷清斗内剩余粉子，然后装妥。

2, we use the end of the machine, should take out the rotating drum for cleaning and brush the remaining powder in the bucket, and then install.

3、若滚筒在工作中发生不稳定的情况，我们应该调整前轴承卒上的M10螺钉到适当位置。如果齿轮轴发生窜动，就需要调整轴承架后面M10螺钉到适当位置，调整间隙至轴承不发出响声，手转皮带轮，松紧适当，过紧或过松都有本机发生损坏的可能。

3, if the roller in the work of the situation is not stable, we should adjust the front bearing M10 screw to the appropriate location. If the gear axis traverse, you need to adjust bearing frame behind the M10 screw to the right position, adjust the gap to the bearing does not make the sound, hand turn the pulley, elastic proper, too tight or too loose may damage the machine.

4、定期检查机件，检查蜗轮，蜗杆，润滑块上的螺栓，轴承等活动部分是否有转动灵活和磨损情况，发现缺陷应及时修复，不得继续使用。

Activity 4, regularly check the parts, check the worm, worm, lubricating block bolts, bearings and other parts are flexible rotation and wear, it is found that the defects should be repaired in time shall not continue to use.

5、如果机器停用时间较长，必须把机器全身擦干净，机件的光面涂上防锈油，然后用布蓬盖好。

5, if the machine stops for a long time, we must clean the machine body rub, parts of glossy coated with anti rust oil, then use cloth Punta cover.